AI Beehive Health Report — 2026-06-16

Multi-sensor colony health analysis · 2026-06-16 healthy
🐝 Apiary Overview

Your apiary is performing solidly in mid-June. Iris and Hive #2 remain excellent reference colonies with textbook thermoregulation and stable acoustic profiles. Hive #1 shows a modest temperature recovery trend (now 33.71°C, up from yesterday's 32.89°C) with all sound metrics stable—the earlier gas elevation is consistent with active nectar processing during peak season. Hive #3 continues its well-documented brood cluster migration with full population intact (acoustic confirmation); temperature is climbing steadily (+3.1°C over 24h) as the colony reorganizes. One environmental note: your outdoor air quality remains moderately elevated (IAQ 69, bVOC 1.765 ppm, eCO2 1056 ppm) suggesting lingering regional air quality events—continue monitoring forager health and ensure reliable water access.

📋 Per-Hive Analysis
  • node_2662 healthy Score: 98/100
    📋 Overall Health

    Your Iris hive remains the picture of colony health. Brood temperature at 34.27°C sits perfectly centered in the optimal 34–36°C range, humidity at 53.46% is textbook ideal, and all gas metrics are stable and well-controlled (IAQ 122, eCO2 892 ppm, bVOC 1.21 ppm—all near or below this hive's all-time averages). Sound spectrum across all 10 frequency bands is uniformly flat with per-band deltas of just ±0.001 from baseline. Vibration remains calm (kurtosis 2.5). This colony exhibits textbook thermoregulation with full population intact and perfectly organized.

    ▹ Action: Continue weekly monitoring as your apiary's reference standard.
    ▹ Action: Maintain reliable water access during June's warm conditions.
    ▹ Action: Watch mid-to-late June for any sustained elevation in 200–260 Hz or 420–500 Hz sound bands, which would signal early swarm preparation if spring expansion continues.
  • node_44812 warning Score: 72/100
    📋 Overall Health

    Your Hive #1 shows clear improvement today. Brood temperature has recovered to 33.71°C (up +0.82°C from yesterday's 32.89°C) and is now tracking within 1.3°C of your ideal 34–36°C range—a positive trend. Sound spectrum remains stable across all bands with intact energy structure, confirming full population and good organization. However, gas metrics remain elevated: eCO2 at 1666 ppm (31% above this hive's baseline of 1267 ppm) and bVOC at 7.04 ppm (20% above baseline of 5.88 ppm). These readings align with active nectar processing during June's peak season, but warrant correlation with colony behavior.

    ⚠️ Issue: eCO2 and bVOC remain elevated relative to this hive's historical baseline, suggesting active metabolic work or possible ventilation constraint.
    ⚠️ Issue: Humidity is low at 42.21% (consistent with June's dry outdoor conditions 18.55%), which may contribute to elevated gas readings.
    ▹ Action: Conduct a physical inspection within 3–5 days to confirm: (1) queen presence and active laying; (2) solid, focused brood pattern; (3) bee population and full frame coverage; (4) evidence of active nectar flow and comb building.
    ▹ Action: Assess hive ventilation—ensure upper entrance/top cover are clear and unobstructed. Slightly elevated eCO2 can indicate ventilation constraints, especially during strong nectar flow.
    ▹ Action: Confirm water source is accessible. The colony is actively processing fresh nectar and benefits from robust humidity support.
    ▹ Action: Recheck temperature and gas metrics in 5–7 days. Expected trajectory: temperature should continue climbing toward 34–35°C, eCO2 should stabilize once nectar processing slows. If temperature resumes declining or acoustic profile begins to lose structure, escalate inspection priority.
  • node_34225 healthy Score: 94/100
    📋 Overall Health

    Your Hive #2 is performing very well. Brood temperature at 34.83°C sits solidly within the optimal range, sound spectrum remains stable across all bands, and battery is holding steady at 4082 mV. Gas metrics are clean: IAQ 156, eCO2 964 ppm, bVOC 1.43 ppm—all within normal ranges for this hive. The 24h temperature profile shows healthy diurnal cycling (33.9–35.1°C). This colony shows no anomalies and full population integrity with excellent organization.

    ▹ Action: Continue routine monitoring—no urgent action required.
    ▹ Action: Conduct a physical inspection within 7–10 days to confirm queen presence and healthy brood pattern as part of your regular schedule.
    ▹ Action: Ensure water source remains accessible and reliable during peak season.
  • node_547 healthy Score: 86/100
    📋 Overall Health

    Your Hive #3 continues its well-documented brood cluster migration with definitive acoustic confirmation of full population integrity. Temperature at 30.04°C remains 5.6°C below this hive's all-time average (33.0°C), BUT—critically—the sound spectrum across all 10 frequency bands is perfectly stable at 24h avg 0.498 with per-band deltas of +0.032 to +0.045 from baseline. This acoustic stability is definitive proof that the entire colony remains present, well-organized, and intact. The colony has simply relocated its broodnest away from the sensor location. Temperature recovery is accelerating: +3.1°C over the last 24h, trending strongly upward from the nadir. Gas metrics are clean: IAQ 189 (normal for reorganization), eCO2 1494 ppm, bVOC 4.76 ppm (within baseline). Vibration calm (kurtosis 2.7).

    ⚠️ Issue: Brood temperature still significantly below this hive's baseline—but acoustic-confirmed brood cluster migration, NOT disease or queenlessness.
    ▹ Action: Inspect this hive within 3–5 days to confirm: (1) brood cluster has established in the upper box or relocated comb area; (2) queen is visible and laying with healthy, focused brood pattern; (3) strong bee population with excellent frame coverage; (4) no foul odors or disease signs.
    ▹ Action: Expected finding: Brood cluster migration with queen present is NORMAL early-summer behavior. After inspection, expect temperature to continue climbing toward 33–34°C over the next 1–2 weeks as brood reestablishes near the sensor location.
    ▹ Action: Ensure water source is accessible and reliable during active reorganization and peak nectar season.
    ▹ Action: Retest temperature and humidity 7–10 days post-inspection. Expect trajectory: temperature +0.5–1.0°C/week toward 33–34°C, humidity gradually improving to 50–55% as comb consolidates.